Building the exhibition space.Posted: May 13, 2015
The space I have been allocated has a gap in the middle as there is a pillar with electrics on. I need to be close to a power source as I need 11 plug sockets for the exhibition and 12 for assessment. I put up the board with the help of a technical demonstrator, I climbed behind the desks to attach a 2×2 baton to the sides of the desks to allow a piece of chipboard to sit flush with the MDF boards. The hole has been cut in to the middle of the board to be able to reach the sockets beind. The hole will be covered by a piece of my work that will simply lift off to gain access.