Imagine forks had thumbs.
Posted: November 28, 2012 Filed under: Context, Ideas | Tags: anthropormorphism, art, Csad, design, fork, intervention, spot weld, student, thumb, wire Leave a comment
Wire forks, spot welded. I’m starting to look at forks as an extension of the hand, an add on to the body. Working in wire I am designing forks with thumbs, to anthropormorphise them. These would work well as an intervention in restaurants and with friends.
Metal forks.
Posted: November 15, 2012 Filed under: Context | Tags: art, Csad, design, fork, grinder, manipulation, plasma cutter, student Leave a comment
Plasma cut forks. I used sheet metal to create the basic shape without the prongs, I am going to make these using wires that will be spot welded on to the end of each fork. The quality of the cut left by the plasma cutter is unique, and the almost charred look is appealing. I could colour the metals using a flame. There’s still a lot I could do with these shapes. Bending them is something I know will happen.
Printing more substantial cutlery than the canteen has to offer.
Posted: November 15, 2012 Filed under: Ideas | Tags: 3d print, art, Csad, cutlery., design, fab lab, fork, makerbot, student Leave a comment
My second fork, I scaled this one up and printed with full support just to see what would happen as the printing of this was questioned. The fork printed perfectly, so I am going to develop more of a finish for the object.
CuLtlery.
Posted: November 14, 2012 Filed under: Context | Tags: art, bending, Csad, design, fork, student, tracing., vinamould, wax. Leave a comment
Wax fork manipulation, here are some initial wax casts created last week in the wax session. I like the rough quality to the pieces, they look nieve and child like in their making. I want to build form using the fork shape to create something abstract. This could be cast in bronze or scanned in 3D to create a new dimension to the work.
Printing cutlery.
Posted: November 14, 2012 Filed under: Context, Skills | Tags: 3d print, art, Csad, design, fork, makerbot, manipulation, rhino, student Leave a comment
First 3D print!! After the usual issues with Rhino I managed to print a fork.. I drew the shape using a scanned image, created a surface and extruded it before using the bend and twist tools. I then took a 2D drawing of the object and further bent the form. The print only took about 20 minutes to complete. The forms that are printed can be built up to create a further abstract form.
Fork bending fun.
Posted: November 6, 2012 Filed under: Ideas | Tags: arduino, art, Csad, design, fork, laser cutting., perspex, student Leave a comment
Perspex laser cut fork that has been heated and manipulated. The process of this was quite simple, I drew the shape on rhino and then used the software linked to the laser cutter to finish the drawing ready for print. The machine to heat the perspex was simple, a low heat is better than heating instantly as the material bubbles. I like the finish on the fork, its such a simple piece. I’m hoping to use ardunio to make it more interactive and develop a way to progress my design.
Alice's ArtVenture 